This summer Danish design legends Hans Jørgen Wegner
and Børge Mogensen are being celebrated with large exhibitions here in Denmark commemorating
both of their 100th year anniversaries.
However the celebrated ‘Danish modern’ movement of the
postwar era is not all about these two gentlemen or other esthetic heavyweights like
Finn Juhl, Arne Jacobsen and Poul Kjærholm.
In the shadows of desirable icons like the Egg chair,
PK31 sofa and Judas dining table you’ll find equally valuable treasures by
lesser known Danish architects like Kurt Østervig, Illum Wikkelsø, Ib
Kofod-Larsen and the duo Hvidt & Mølgaard to name a few.
Poster by Danist artist Ib Antoni (1965).
With Scandinavian design continuously reaching groundbreaking sales results at premier auction houses like Wright, Phillips de Pury and
The recent inclusion of two beautiful easy chairs by Hans Olsen at Wright’s annual auction for vintage Scandinavian design made me want to focus on the work of this unusual Danish architect. Similar posts about his colleagues mentioned above will follow in the future.
To my knowledge I’ve made the most comprehensive bio of Hans Olsen available online. If anywhere. I must admit that when I started writing this post I surely hadn’t imagined that it would turn out to be such a extensive project. It especially took a lot of time finding images of a prober quality.
Information about the persona and career of Hans Olsen is very scarce and this is all what I’ve managed to gather through the net and my books.
The following examples are most frequently seen
designs by Hans Olsen. Well, here in Denmark anyway.
First, a ‘Roundette’ dining set designed in 1952 for
Frem Møbelfabrik. Note how the back of the chair cleverly fits into the edge of
the table. A both elegant and space-saving solution.
The
chairs were also produced with 4 legs and a different back rest matching the
slight change to the table edge.
As a quick note I’d like
to show this lesser known variant where the back of the dining chairs protrudes
above the tabletop for an easy grip. The chairs are shown with a special
dining table that could be expanded from its basic circular shape into an oval
and then further into a rounded square by adding leaves hidden in the table’s
structure.
It appears to be Olsen’s last design as the source to the picture
below is a Mobilia magazine from 1975 (no. 243).
Second, the CS500 series designed for Christian
Sørensen & Co. (aka C/S Furniture) in 1962. Available with either
upholstered or wooden armrests, all pieces could also be ordered with a low or
high back. It is a design that Olsen
would revisit through the years and continuously refine creating very similar
upholstered furniture series with subtle differences to esp. the wooden frame
and armrests.
Third, this rocking chair – model 532A – was designed
by Olsen in c. 1963 and produced
by Brdr. Juul Kristensen. Another frequent
guest at the Danish auction houses.
Although esthetically pleasing, functional and
comfortable these pieces do not have sufficient charisma to rescue one from
eternal public oblivion.
While classically trained as an architect under Danish design legend Kaare Klint’s watchful eye, Olsen was much more experimental than the traditional “Klint school” in his take on creating furniture. Especially his fondness of using bent laminated wood (aka plywood) resulted in some of Olsen’s best designs, desirable even today, and helped him gain a reputation as a serious player on the Scandinavian design scene.
This first example is a simple but clever design as the seat and backrest of this dining chair is formed from a single piece of bent plywood. Created in 1955 and produced by Olsen’s long term collaborator, N.A. Jørgensen.
While classically trained as an architect under Danish design legend Kaare Klint’s watchful eye, Olsen was much more experimental than the traditional “Klint school” in his take on creating furniture. Especially his fondness of using bent laminated wood (aka plywood) resulted in some of Olsen’s best designs, desirable even today, and helped him gain a reputation as a serious player on the Scandinavian design scene.
This first example is a simple but clever design as the seat and backrest of this dining chair is formed from a single piece of bent plywood. Created in 1955 and produced by Olsen’s long term collaborator, N.A. Jørgensen.
Olsen also designed this beautiful shell chair in 1955
for N.A. Jørgensen.
Today it can be found in premier furniture stores dealing
with vintage design.
be the Bikini chair. Created in
1961 for Frem Møbelfabrik, it was unquestionable a radical piece for
its time
and received much attention in the press for its futuristic lines and confident
attitude.
Even now, 53 years later, it still looks completely contemporary.
A bit of mystery seem to revolve around this
particular chair, model 163,
created by Olsen for N.A. Jørgensen in 1957.
I’m not sure if this model was further developed into
the similar examples below or whether this similarity has simply caused Olsen
to be continuously misquoted as the designer of these chairs. I’m sure the
majority of people selling chairs like those below, whether private or working at
auction houses, have not seen the original b/w photo of model 163. But with
Olsen being known for his experimentations with bent plywood, maybe it just
seems like an obvious conclusion to make and now this possible misquotation is
firmly established. While the overall design of these pieces share the same
idea there are very clear structural differences upon closer inspection, esp.
in regards to how the bent plywood back is supported by the frame.
Olsen also created a wide range of upholstered
furniture with beautiful, curvy lines.
The easy chair below was originally designed
as a knock down piece for C/S Furniture in 1955.
I’m not sure whether the idea
was to reduce the cost of transportation/export or to sell the
chair in a flat
package to be assembled by customers themselves in present day IKEA-style.
Nevertheless
the design was relaunched in a updated, factory-assembled version as the CS800
series in 1956.
The previously mentioned CS500 series from 1962 also
seemed to have been updated
or at least proved inspirational for the masculine CS400
series launched in 1966.
This beautiful easy chair was designed in 1956 and
produced by Jørgen Jørgensen.
This particular example was sold in May 2014 at Wright
in Chicago for $3125 incl. buyer’s premium.
One of my favorite mid century designs is the 'Fried
Egg' chair designed in 1956 and produced by Verner Birksholm. Words can simply not
express how much I would like to own this chair. Why this chair has such an
unusual name is clear from the first picture with a little imagination.
This particular example was also sold in May 2014 at
Wright in Chicago for $7031 incl. buyer’s premium.
While Olsen seemed to have favoured creating lounge seating with plenty of upholstery, this easy chair
from 1955 featured a more traditional visible construction. Produced by Verner Birksholm.
Like many of his architectural colleagues in the Mad
Men era, both Danish and international, Hans Olsen
showed a keen interest
in creating modular furniture for a modern and more relaxed way of living.
This resulted in Olsen’s desirable 'TV-bench' designed
in c. 1956 and produced by Jørgensen Møbelfabrik.
The seats and table can be
moved around, either on the bench and thus providing a normal sitting height,
or
be placed freely on the ground in a more lounge-like setting. Finally the
cushions from the two seats
could be left on the bench and provide extra
seating space. Both 2, 3 and 4 seat versions were made.
This model seems to have been particular popular in and
around the sunshine state of California, USA. The picture below is from
the highly influencial architectural experiment, the 'Case Study House' program, launched in 1945 by the Arts & Architecture Magazine. The interior is from CSH house #20, known as the Bass House, completed in 1958.
A modified version, 'System 137', followed in 1957
featuring fully upholstered seats.
The table top in the middle is reversible
and has a cushion attached on the opposite side.
System 137 also provided storage solutions based on
the same basic frame.
Hans Olsen created quite a few modular and bench/sofa-like
Bench with reversible seats - Verner Birksholm - 1955.
Bench - Verner Birksholm - 1956.
'System 1225' - Hovedstadens
Møbelfabrik - 1956.
The most unusual chair to come from Olsen's constant experimentation must be the
'Frederik the 9th' chair.
Designed in 1964 and produced by M. J. Rasmussen, this
chair got its name from the Danish King Frederik VII who was supposedly very
fond of sitting backwards. Olsen’s inspiration came from an old chair at
Rosenborg Castle in Copenhagen, a former residence of the Danish royal family
now turned into a museum.
This modern reinterpretation won Olsen the A.I.D. gold
medal (American Institute of Interior Designers) in 1965.
More beautiful furniture by Olsen can be seen in these original photos.
Dining chair (model 208) - Falster
Møbelfabrik - 1956.
Dining chair (model 149) - N.A. Jørgensen
- c. 1956.
Easy chair - N.A. Jørgensen - c. 1957.
Sled chair - Verner Birksholm - c. 1957.
Many Danish furniture classics of the postwar era have
been relaunched during recent years and a few of Olsen’s designs would seem
relevant for reproduction. I recently stumbled across an official-looking
homepage from 2012 stating that 4 of Olsen’s designs, incl. the Bikini chair
and Fried Egg chair, would be relaunched soon. However I
have neither heard or read a word of it from any other source so maybe the project has since been abandoned.
have neither heard or read a word of it from any other source so maybe the project has since been abandoned.
I hope you’ve enjoyed this Hans Olsen bio. In the
future I’d like to write similar posts featuring Danish architects Illum
Wikkelsø, Ib Kofod-Larsen, Kurt Østervig and Tove & Edvard Kindt-Larsen.